|
Earthquake equalizers and bass restoration units are top notch and favored by some of the most picky audiophiles around. |
|
 |
MODEL: EQ-4000PXi
Variable Low-pass crossover, 35Hz to 100Hz, 18dB/Octave slope, +20dB variable boost
-
Fader action
-
Dual inputs (CD/MAIN)
Input impedance: 47kOhms
Frequency response: 15Hz-50kHz
THD + NOISE: less than 0.0005%
Signal to Noise 100dB*Input sensitivity 250mV to 3 V
-
Dimensions 6.5-in x 1-in x 5-in
Weight: 2.5lbs
Four
band equalization:
+/- 20dB @ 55Hz
+/- 16dB @ 200Hz
+/- 4dB @ 1.7kHz
+/- 20dB @ 20kHz -
MSRP: $175.00
|
|
|
|
MODEL: EQ-7000PXi
Operating Voltage: 10.5---16VDC Idle: 170 mA Recommended fuse size: 1 Ampere Input sources: 2 stereo RCA sources, 1 Phono source Input sensitivity: Adjustable from 100mVrms up to 14 Vrms Input impedance: Variable from 3.8 kOhm up to 10.2 kOhm -
-
THD @ 3 Volts output: 0.003% Frequency response: 15-34000Hz @ -3dB Subwoofer frequency control range: 60 - 160Hz (@ -3db, 18dB/oct) Subwoofer upper cut off frequency: 160Hz Channel separations: 68dB Signal to noise ratio: 96dB Center frequencies (in Hz):
45, 120, 275, 700, 2000, 5000, 14000 -
Control Range:
18dB (12 O'clock is the Bypass position)
Dimensions (H x W x D):
1-in x 7-in x 4-1/4-in (without face plate) MSRP: $225.00
|
|
 |
MODEL: MB1
Maximum input level: 15 Vrms Maximum output level: 13.5 Vpeak Frequency response: 10Hz - 80kHz ±0.3dB Total harmonic Distortion: 0.001% Balanced input noise rejection: > 60dB Input impedance: 10 kOhms Output impedance: 150 Ohms Power supply: High headroom PWM Power draw: 160mA Recommended fuse rating: 1 Ampere Dimensions (H x W X D): 1-1/8 in x 8 in x 5-1/2 in + 1/4 in for RCAs MSRP: $225.00
|
|
|
|
